Thursday, December 29, 2011

Beckett 7114310 Waterfall Pump 3500gph

!: Low Price Beckett 7114310 Waterfall Pump 3500gph save you money!

Brand : Beckett Corporation
Rate :
Price : $115.98
Post Date : Dec 29, 2011 16:12:06
Usually ships in 1-2 business days



This Beckett waterfall pump features new, longer life wet rotor, wet bearing technology (no seals), passes larger particles, operates continuously, and is oil less. This pump is designed for extra large fountains and waterfalls, operates quietly, is cool running, operates at an energy efficient 300 watts, and is safe for fish. The pump cycles 3,500 gallons per hour at a one foot lift. The pump is for underwater use only, may be placed horizontally or vertically, and includes a 16 foot, UL listed, 3 pronged cord with ground.

Shop For Smith And Wesson J Frame Grips Lowest Price Soft Bonnet Ionic Hair Dryer Chamberlain Liftmaster Troubleshooting Sale

Friday, December 16, 2011

Beckett 7107910 Pond Waterfall Pump 600gph

!: Low Cost Beckett 7107910 Pond Waterfall Pump 600gph buy online

Brand : Beckett | Rate : | Price : $73.99
Post Date : Dec 16, 2011 12:46:31 | Usually ships in 24 hours


This pump, by Beckett, is great for ponds, streams, and extra large fountains and waterfalls. It features new longer life wet rotor technology (no seals), passes larger particles, is designed for continuous duty, and is oil less. This energy efficient pump runs at 600 gph, is cool running, operates quietly, has a 16 foot, UL listed, three pronged cord with ground, and is safe for fish. Recommended for underwater use only, may be used horizontally or vertically.

More Specification..!!

Coupon Berghoff Cookware Hi8 Camcorder Ideas Discount Minka This Instant

Wednesday, December 7, 2011

Drain Systems

!: Drain Systems

Introduction

Sewage and drain systems are part of modern history and essential part to understand the process of development of construction of water systems in human history process.

In ancient world, most of the sophisticated Sewage and Drain and water systems, where built in and for the kings and the rich people. It was until, everyone in the society understood that it was a common problem.

One of the most ancient sewage system and drainage are traced back to the Ancient Indus. These systems have amazing similarities to our modern sewage systems. Almost all houses in cities such Harappa and Mohenjo-Daro in India and Pakistan had an access to fresh water and drain systems facilities. Waste waters systems were designed to direct to a covered Drain systems which ended in major streets.

Fast growth of cities in the middle and in the last 200 years, created the need to design and implement the same basic Sewer and drain principals, but this time, it was for much bigger population, for millions of people in each city!

Type of Drains

Main Line-

Define as the drain system that will carry out the waste water from the building (Residential or Commercial) to the city sewage system. The law in USA, in the vast majority of the counties and cities, requires the Home Owner or the Property Owner (Commercial) to maintain the Mainline and repair it!!

(Note: the home owner is responsible for the sewer line all the way even the connection to the city, which is called the "Saddle" or "The City Tie In". Sewer mains can be from 6 feet deep to 10 feet deep due to freeze line specifications for the area)

Secondary line-

Drain systems that are located inside buildings walls (Housed, condo complexes, and commercial buildings) and will carry waste water into the Street main line.

Residential Drains-

All of your drains in your house is considered secondary lines for example: kitchen, laundry, tub/shower and hand sink drains are all considered secondary drains. They all consist from 1 inch pipe that will end up in a 3 inch or 4 inch main line. The toilet secondary line, is the only one in the house that its size on goes from 3 to 4 inches.

We can find only the mainline will exit the house and go to the street. If you have an alley almost all the time the main Drain will exit there to the city drain.

Residential drain problems can be categorized into Kitchen, Bath Tub, Shower, Laundry and Toilet. All these lines are considered secondary and will connect to the main line.

Bathtubs and Shower drain Problems-

No surprise here, hair is the main cause for slow or complete stoppage. Soap, other dirt, shampoo, and hair products create the problem. In most cases if the problem persists and is not treated properly, the pipes will eventually collapse and will cause a major problem.

To unclog the drain, Plumbers will use a 3/8 inch cable to clear the drain. And depending how dirty the drain is, and how hard and solid the build-up in the pipe is, we might need to run a Hydro-Jetter to clear the Drain completely. A snake will push and "Drill" a hole in the clogged drain, while a Hydro-Jetter will break and clear the crystallized solids accumulated on the pipe! Recommendation will be, using Hydro-Jett every 5 years in showers and tub.

Kitchen Drain-

Kitchen Drain clogs are caused by food debris, grease and years of buildup, rice and pasta leftover should not be used in a garbage disposal. A secondary snake machine with �inch cable will clear the drain.

Hydro-Jetting is almost always recommended to actually clean the drain and will have the drain running up to 10 years depending what goes down the drain. Most Plumbers will warrantee if Hydro-Jetting is used.

Laundry Drains-

A typical Clog is due also for hair, line, dirt soap parts that will slow the flow and eventually stops up the drain. A Secondary snake machine with �inch cable is used to clear the drain, but plumber will give warranty only for a month or two. A Hydro-Jetter is almost recommended to actually clean the drain and open its original size. In most cases, it is recommended that this secondary lines every 10-15 years to prevent a major drain problem that can end in broken pipes.

Hand Sink-

These clogs are due to the fact, that when many products that are washed down like toothpaste, mouth wash and soap, hand washed dirt etc. When combining all those chemicals over the time the drain just built up and stops the drain. A snake 3/8 inch cable clears the drain. Depending how dirty the drain is, a Hydro-Jetter to actually cleaning the drain.

Floor drain-

These drains get all kind of dirt, dust, leafs and debris (all kinds), and will clog these drains. A secondary snake �inch cable is used to unclog the drain.

Toilet / Maintenance -

A toilet clogged sometimes is just inside the toilet and can be cleared with a hand Auger Cable. After clearing the toilet, it is important to check the water flow in the basement (if there is one) in order to make sure that the main line is clear too!

Main line-

The main line drain is the heart of the property (Residential, Commercial) sewage system. A stoppage in the main sewer main line can cause immediately a flood in the basement (If existed) or flooding other parts of the house, causing damaged to carpets and other valuable items in the house. Main line should be snaked immediately with �inch cable. A Skilled plumber can make that determination on where the clog is at. Sewer main stoppage is usually due to roots, baby wipes, partially collapsed pipes, or complete off-set.

A sewer camera should always be run to inspect these drains. In most cases snaking and hydro-jetting the main line will solve the problem unless pipe structure problem is detected. In case of of-set or broken pipe or root problem, the sewer line must be replaced completely.


Drain Systems

Celestron Telescope Fast Interview Snow Joe 13-amp Electric Snow Thrower

Saturday, November 26, 2011

Little Giant PE-2H 1/40 HP Small Submersible Epoxy Encapsulated Pump

!: Purchase Little Giant PE-2H 1/40 HP Small Submersible Epoxy Encapsulated Pump order

Brand : Little Giant
Rate :
Price : $80.80
Post Date : Nov 27, 2011 06:01:35
Usually ships in 24 hours



Little Giant PE-2H 300 GPH Epoxy Encapsulated Statuary Fountain Pump, 6' Power Cord (518400)Small submersible epoxy encapsulated pump for commercial, industrial and home use. Applications include statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This compact 300 GPH pump features a 1/4" MNPT discharge, 12.2' shut-off capability, screened inlet and a 6' power cord.Little Giant PE-2H 300 GPH Epoxy Encapsulated Statuary Fountain Pump, 6' Power Cord (518400) Features:; 12.2' maximum lift; 47 watts; 1/4" MNPT discharge; Thermal overload protection; For submersible use only ; Little Giant FC-1/4 1/4" Discharge Control Valve (599045) Not Included.Little Giant PE-2H 300 GPH Epoxy Encapsulated Statuary Fountain Pump, 6' Power Cord # 1/4" MNPT Discharge (accepts 1/2" I.D. tubing (518400) Specifications:; Flow: 300 GPH @ 1 Foot of Head; Cord Length: 6'; Shut Off: 12.2; Voltage: 115; Hertz: 60; Amps: 0.8; Watts: 47; Weight: 4.17 lbs.; Height: 4.2"; Width: 2.8"; Length: 4.8"

Toro Recycler 20332 Order Information Best Price Dyson Eggnog K Cups Clearance Sale

Friday, November 11, 2011

Beckett G535AG20 535 GPH Submersible Pump

!: Low Cost Beckett G535AG20 535 GPH Submersible Pump sale

Brand : Beckett
Rate :
Price : $74.95
Post Date : Nov 12, 2011 07:39:15
Usually ships in 1-2 business days



This pump features a dry rotor (sealed), is oil less, and has a UL listed, 3 prong cord with ground. It has a half inch MNPT discharge , accepts 3/4 inch I.D. hose, has screened suction, and belongs to Beckett's Versa Gold Series. The pump is perfect for large ponds, small waterfalls, fountain nozzles, and other water features and has a lift of up to 12.4 feet. It can be used for ponds as large as 500 gallons. Its filters are designed to improve the efficiency and life of the pump and are easily disassembled for cleaning. Optional MFB235 filter extends pump life. This pump also boasts a direct drive, epoxy encapsulated design, an inlet screen designed for continuous duty, and a ball bearing motor matched to a dynamic shaft seal. It pumps 500 gph at a one foot height.

Gun Safes Dallas Info Great Deals Easy Heat Deicing

Wednesday, October 19, 2011

Sphere Fountain - 5 Easy Steps to Design a Rolling Sphere Tabletop Fountain in Less Than 30 Minutes

!: Sphere Fountain - 5 Easy Steps to Design a Rolling Sphere Tabletop Fountain in Less Than 30 Minutes

Rolling sphere fountains are absolutely marvelous in their appeal and design. They are one of the most difficult fountains to design at home. However, with this easy-to-implement design guide, it should be a piece of cake for you to design a rolling sphere tabletop fountain.

Material You Would Need:

o Submersible pump that circulates about 80 to120 gallons of water per hour.
o Narrow flexible pipe tubing to fit the pump spout opening
o A small light-weight rolling ball made from marble.
o A rock or stone base with drilled hole in middle.
o A proportionally sized bowl
o River stone or pebbles.

Here's the Easy-To-Implement Step-by-Step Design Guide

Step 1: Setup Clean your bowl and the rock base. Make sure that the base is drilled thoroughly and that there are no blockages. Place the submersible water pump in the bowl. Make sure your pump has the water flow set to high. Add sufficient water in the bowl to cover the pump and test its operation. Once you verify that the pump fits within the bowl and it's operational, turn it off.

Step 2: Base Integration Place the rock base on top of the pump spout. If the spout of pump is too wide, use the flexible pipe tubing to pass through the drilled base. Cut the pipe tubing on the other end of the drilled base so that it stays invisible. Turn on the pump and see if the water flows through the drilled base.

Step 3: Add The Marble Sphere Turn on the pump and verify if the water flows through the drilled base to turn the marble sphere. If the marble sphere does not turn, you have two options: either choose a pump with higher gph capacity (Gallons per Hour capacity) or choose a marble sphere with lighter weight.

Step 4: Test Everything & Decorate Now that you have placed the sphere on top of the drilled base, your fountain is almost ready. Add decorative features like river stones, pebbles, moss, or mosaic to your bowl if you want to add some flare to your water fountain!

Step 5: Maintenance Maintenance of this fountain is fairly easy. Just check the water level regularly and observe the evaporation rate of the water. Make sure you keep the bowl clean of debris and other external material or it might stop working because of pump issues.

Applying these easy-to-implement steps would help you design a beautiful rolling sphere fountain to refresh your mind, rejuvenate your senses, and unleash your creativity this Christmas season!


Sphere Fountain - 5 Easy Steps to Design a Rolling Sphere Tabletop Fountain in Less Than 30 Minutes

Buying Blueprint

Wednesday, April 20, 2011

Why It's foremost To Aerate Your Pond

!: Why It's foremost To Aerate Your Pond

It's a joy to have a pond in your own garden. It's a place where you can spend a quiet afternoon and reflect on the blessings you have received. It's something that can call to mind many remarkable memories of citizen you love. By the pond is also a great way to relax and just be happy for having that time away from the hustle and bustle of city life. However, if you're going to enjoy all of these, you should be willing to put in a exiguous exertion into maintaining your pond. And one thing you should all the time be particular about is maintaining the right oxygen levels in the water.

A pond that is left untended can nothing else but come to be an eyesore, not to mention a source of unpleasant odors that nobody, not even yourself, will appreciate. These possibilities can be attributed to decomposing fish waste, algae and other organisms that are submerged in the water. The submerged plants do give off oxygen, but this is never enough to aerate the whole pond so that it remains healthy. However, when the right oxygen levels are maintained in the water, the question can be avoided with the use of a pond aerator.

There are different types of aerators in the store today, and choosing one for your pond will wish you to consider its depth. If it is no deeper than eight feet, you can choose a floating aerator which sprays oxygen into the water from just below the exterior and dispels harmful gases such as carbon dioxide and ammonia. What's great about exterior aerators is, they don't only keep the water healthy. They can also come in attractive shapes and add attractiveness to your orchad view.

If your pond is deeper than eight feet, then you can consider getting a bottom aerator which functions similarly as the floating aerator, except that it pumps oxygen towards the bottom of the pond then pushes the bubbles up to the surface. These machines can work either on electricity or wind power, but since large and deep ponds are quite difficult to run on electricity, wind power of three to five miles per hour becomes more suitable.

Using an aerator will not only benefit your pond and your fish, but you and everybody else who will not have to inhale noxious gases that come from an unmaintained pond. An aerator will also allow you to cut back on other pond-cleansing products because the oxygen itself will work to assert the natural equilibrium in your pond so it stay clean and odor-free.


Why It's foremost To Aerate Your Pond

!: Learn Mica Floor Lamp !: Asics America For Sale

Monday, April 4, 2011

Submersible Fish Pond Pump - Forget the Old Types!

!: Submersible Fish Pond Pump - Forget the Old Types!

A organery will have a more natural and picturesque look if you contain a pond on the uncut design. Your house will certainly enjoy the attractive elements like fountains, figure-shaped spouts, and waterfalls. The sound of water in the organery is quite refreshing and you can relax because of the calmness of the surroundings. For the natural equilibrium of the pond and for productive performance, you will need to pick the standard pond pump. The submersible pump is an perfect choice.

There are 2 factors that you need to consider. One is the volume of the pond water and the height of the fountain principles or the waterfall system. These systems are responsible for important the water up and out.

When calculating the water's volume, you must reconsider the unit's inlet. Quantum the height beginning from the outside and then add 20% for the final figures. This will ensure that even when the principles is not performing very well or when the water pressure drops, water flow will still be optimal. Manufacturers of pond pumps usually contribute a reference table where you will base the measurements of your pond. With the reference table, you can certainly find the perfect pond pump that can meet your needs.

If your pond naturally cycle the water and you don't have additional streams and decoration, the estimation should be based on the pond's whole volume. For instance, if the pond has 500 gallons of water, you will need a pump with the capacity 500 gal/hour. Bigger ponds are harder to speculate so you will need to use the reference table of the manufacturer.

The pumping technology has improved in the recent years. Don't go for systems that use parasite for the casting and instead, opt for magnetic driven pumps. The pump may be a limited costly but the operational cost for the long term is quite good. If the pond is susceptible to pollution and contamination, you can use a water filtering pump.

The submersible fish pond pump is an perfect investment and it's great for smaller ponds. The pump can make your organery more beautiful while ensuring the water's quality. If you need to empty the pond, the submersible pump can also help you with the task.

If you think that the submersible pump can meet your pond's needs, then go ahead and buy it. You can pick among the many manufacturers of submersible water pumps. But just make sure that you pick a reputable jobber and maker to ensure the potential of the product. Do some shopping colse to and in no time, you can start aerating your pond. Fish pond pumps are vital to your fish's health so try to get one as soon as you have the pond.


Submersible Fish Pond Pump - Forget the Old Types!

!: Frye Deborah Boot Compare !: Paul Frank Beach Towel Quiz

Wednesday, March 23, 2011

Little Giant 523003 P-Aaa Black Little Giant Pumps

!: Price Little Giant 523003 P-Aaa Black Little Giant Pumps compare

Brand : Little Giant | Rate : | Price :
Post Date : Mar 24, 2011 02:52:06 | Usually ships in 1-2 business days

Small Submersible Pumps Power Cord Length: 6 Amperage Rating: 0.5 Horsepower: 1/60 Outlet Size: 1/4 Pressure: 2.0 Material: Nylon

  • Package Quantity: (1) Unit
  • Power Cord Length: 6
  • Amperage Rating: 0.5
  • Horsepower: 1/60
  • Outlet Size: 1/4
  • Pressure: 2.0
  • Material: Nylon

!: Skilcraft Vista Gel Pen


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。